D3Codex
TCL

t-stat command

.md

The t-stat command displays a report of the current attachment status for all tape devices defined on the system. It shows the device number and description, UNIX process name, density, and currently attached user.

Synonymst-status

Syntax

t-stat {(options}

Parameter(s)

options p Directs the report to the spooler.

Example(s)

t-stat
Tape Status          16 Feb 2003 14:30:40
#    Type            Density          Owner   Device Name
====================================================================
0    floppy          3 1/2" 1.44m     191*+   /dev/rpdsk/4
1    quarter inch    high                     /dev/rmt/0n
2    4mm DAT                                  /dev/rmt/1n
3    4mm DAT                                  /dev/rmt/1un
4    8mm tape                                 /dev/rmt/2n
5    8mm tape                         141     /dev/rmt/2un
6    floppy          pseudo floppy            /usr/opt/pick/bin/abs
7    floppy          pseudo floppy            /usr/opt/pick/bin/data
8    floppy          pseudo floppy            /usr/opt/pick/bin/ref
9    network                                  /home/tmp/pipein
10   floppy          pseudo floppy    191*    /home/tmp/floppy
11   floppy          pseudo floppy            /n/dev/home/tmp/floppy

See also

account-restore command→admin.tape utility→admin.tape.setup utility→chg-device command→file-save command→fuser command→list-device command→readt statement→set-8mm command→set-device command→set-floppy command→set-half command→set-sct command→t-det command→t-select command→t-verify command→Tape handling commands→u313c user exit→ue070 user exit→writet statement→